Heiche HEIS01 KTL system other metalworking machinery
Leipzig
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 89 380...
Show
+49 89 38031644
Germany 
Germany, Kirchheim
Germany, Leipzig
Germany, Dortmund
Germany, Location:munich
Germany, Gräfelfing
Germany, Gräfelfing
Germany, Gräfelfing
Germany, Gräfelfing
Germany, Gräfelfing
Germany, Gräfelfing
Germany, Gräfelfing
Germany, Location:dresden
Germany, Stuttgart
Germany, Munich
Germany, Munich
Germany, Gräfelfing
Germany, Wiefelstede
Germany, Bruchsal
Germany, Bruchsal
Marke: Heiche
Manufacturer
Heiche
Model
HEIS01 KTL system
Year of manufacture
1982
Major overhaul
2008 to 2013
Status
Fully operational
Control system
Siemens S7-300
Operating software
Ditec
Operating modes
Manual
jog
and fully automatic
Technical Specifications
Max. workpiece window: 1,240 x 800 x 600 mm
Max. workpiece carrier weight: 160 kg
Coating material: KTL paint (cathodic electrodeposition)
Coating thickness: 10 to 45 micrometers
Cycle time / throughput: 190 seconds per cycle (18 workpiece carriers per hour)
Noise level: below 85 dB(A)
Overall dimensions (L x W x H): 9,000 x 12,000 x 7,000 mm
Number of baths: 15
Number of loading and unloading stations: 6
Conveyor system: Chain conveyor by KEWESTA
Dip system: Lifting station by Klaus Sessler
Drying: Curing oven by Rippert
Electrical and Utilities Data
Supply voltage: 3-phase 230/400 V / 50 Hz
Control voltage: 24 V DC
Total installed power: 270 kW
KTL control cabinet fuse: 160 A and 100 A
KTL rectifier fuse: 300 A
Pneumatic pressure: 7.5 bar
City water consumption: 800 l/h
Demineralised water consumption: 600 l/h at 2.5 bar
Hot water supply: 85 degrees C
Curing Oven
Manufacturer: Rippert
Year of Manufacture : 2011
Max. drying temperature: 220 degrees C
Heating output: 240 kW
Heating medium: Natural gas
Recirculating air volume: 40,000 m3/h
Fresh air volume: 1,000 m3/h
Pre-heat zone max. temperature: 120 degrees C
Heating zone max. temperature: 220 degrees C
Exit zone max. temperature: 120 degrees C
Pre-heat zone stations: 4
Heating zone stations: 11
Exit zone stations: 4
Complete Package Includes
Chain conveyor with 64 stations
18 lifting stations at the baths
11 pre-treatment and cleaning baths plus double spray station
1 KTL process bath
3 post-treatment and finishing baths
1 curing oven with pre-heat zone
heating zone
and cooling zone
1 rectifier 0 to 400 V / 400 A including current density control
Control cabinets and operator panel
360-degree part rotation system
4 supply tanks (3 m3 each) for process bath
1 chamber filter press for zinc phosphate bath
1 exhaust air scrubber with supply tank (0.4 m3)
2 oil separators
Various pumps
filters
and pipework
Biofilter system
40 rack trolleys
250 fixed product racks
250 movable product racks
Various hook strips
Major Overhaul Works Carried Out 2008 to 2013
New curing oven installed
KTL paint bath including all peripherals renewed (paint pump
ultrafiltration
heating/cooling
circuit
round dialysis cells)
Bath circulation system renewed
Lifting motors renewed
Chain and chain track completely replaced
Control system renewed
Rotating rack technology added
Spray degreasing station added
Frequency converter technology added
Pre-treatment dryer added
Zinc phosphate filtration via chamber filter press added
Find more here
show contacts
Contact us at
show contacts