Выдувное оборудование SIPA SFR 8

Machine type: rotary stretch-blow moulder for PET bottles
Number of cavities: 8
Output: up to 12,400 bottles/hour
Bottle formats: 0.5 l, 0.75 l and 1.5 l
Neck finish: 28 mm / 1881 (short neck)
Electrical connection: 400 V, three-phase
Total connected load: 147 kW
Location: Germany
Four sets of blow moulds with eight cavities each: two sets for 1.5 l, one for 0.75 l and one for 0.5 l
Overview
This SIPA SFR 8 is an 8-cavity rotary stretch-blow moulding machine for PET bottles
built in 2009 by SIPA (Italy). It processes PET preforms into bottles of 0.5 l
0.75 l and 1.5 l at an output of up to 12,400 bottles per hour
The blowing station is fully enclosed by safety guarding with viewing windows
and the machine is operated from a machine-mounted touchscreen control panel. It has been running as the stretch-blow moulder of a PET bottling line for mineral water and soft drinks
and is still installed and under power
so it can be inspected in production
Technical data
Included in the sale
Preform feeding system
Chiller
Machine-mounted touchscreen control panel
Full safety enclosure with viewing windows
Not included
Preform hopper (can be custom-made)
High-pressure compressor
Condition
The machine is in very good condition and has been maintained regularly by the manufacturer. It is still installed and under power and remains in regular production
so it can be inspected in operation on site
Availability
The machine remains in production until 30 September 2026. Dismantling and loading onto the buyer's trucks will take place between 10 and 14 October 2026 and can be carried out by the seller. The machine is located in Germany